Cisco TelePresence Manual page 22

Configuring a cisco unified communications manager sip trunk with a cisco telepresence content server

Hide thumbs Also See for TelePresence:

CUCM Integration with Content Server 6.2

To Create the Integration

Step 1

In Content Server Administration, expand the Management tab, go to Configuration> Site Setting >SIP

Setting.

Step 2

Check the SIP enabled check box to enable registration with a SIP registrar.

Step 3

Enter the display name in the SIP display name text box.

Step 4

Enter the SIP address in the SIP address URL text box.

Step 5

Select the registration mode of the content server in the Registration field. The available options are

Terminal or Trunk.

Step 6

Select the time interval in seconds, in the Trunk Peer Polling Interval drop-down.

Step 7

Enter the playback domain suffix.

Note

This option will display, if SIP is in Trunk mode.

Step 8

Enter the server address in the Server address text box.

Step 9

Select the transport protocol from the Transport drop-down.The available options are TCP

(Transmission Control Protocol) and UDP (User Datagram Protocol).

Step 10

In the User name text box, leave the box blank.

Step 11

In the Password text box, leave the box blank.

Note

The User name and the Password is not required as authentication is not enabled in CUCM SIP Trunk

profile.

Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide

3-36

Chapter 3

Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence

Table of Contents