Cisco SPA303 User Manual page 5

When you have an active call and a held call on your phone, press this
Conflx or Conf softkey to create a conference for these calls. If you have multiple calls
on hold, you will be prompted to choose a held call by pressing the line
button. Also see Conf. To end the conference for everyone, press
or hang up. To exit the conference and allow the other callers to
.
continue the call, press
Dir or Directory To place a call from your local directory, press this softkey. Use the
navigation button to open a directory and select a number. To dial a
selected number, press . To exit without dialing, press twice.
EditDial When using a Redial list or Call History List, press this softkey to edit the
selected number before placing a call. For example, you may need to edit
a misdialed number or change the dialing prefix. Then press to
place the call.
Forward, Clr Fwd
Press to forward all incoming calls. Then enter an extension or
phone number. Press to receive calls normally.
End Call Press to end the active call. Exit When viewing a menu on the
screen; press this softkey to return to the home screen.
Grpick or
Press to display a list of ringing calls. Use the navigation button to select
Grpickup
a call, and then press to answer it.
Hold During a call press this softkey to place the call on hold. Ignore When the
phone is ringing, press this softkey to divert the call to the configured Call
Forward No Answer Number.
Lcr Returns the last called that was received on this phone.
New Call
After placing a call on hold, press this softkey to place a new call.
5