NETGEAR DG834N Reference Manual page 36

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
2. In the Wireless Settings screen, under the Wireless Station Access List section, click the Setup
Access List button to display the list.
Figure 2-3
3. Select the Turn Access Control On check box to enable the restricting of wireless computers
by their MAC addresses.
4. If the wireless station is currently connected to the network, you can select it from the
Available Wireless Stations list. Click Add to add the station to the Trusted Wireless Stations
list.
5. If the wireless station is not currently connected, you can enter its address manually. Enter the
MAC address of the authorized computer. The MAC address is usually printed on the wireless
card, or it might appear in the modem router's DHCP table. The MAC address is
12 hexadecimal digits.
Click Add to add your entry. You can add several stations to the list. When you are finished
adding stations, click Apply.
Note: You can copy and paste the MAC addresses from the modem router's Attached
Devices screen into the MAC Address field of this screen. To do this, configure
each wireless computer to obtain a wireless link to the modem router. The
computer should then appear in the Attached Devices screen.
2-10
v1.0, April 2008
Wireless Configuration