Electrical Connection - Honeywell Smile Room Connect SRC-10 Installation Instructions Manual

Smile Room Connect SRC-10
3.1.2

Electrical connection

Fig. 3: Smile Room Connect SRC-10
1. Connect the SRC-10 to the customer's LAN network:
- Via a network cable into an available Ethernet port on the
customer's internet router or switch. The length of the total
cable from the SRC-10 to the next switch or router must
not exceed 100 m.
- Alternatively, via a WLAN connection using the integrated
WLAN module in the SRC-10. Ask the customer for their
WLAN network access data—you will need this during the
start-up/initial setup, see chapter
2. Connect the AC adapter provided
3. Plug the AC adapter into an electrical outlet.
13
1
2
Installation Instructions
4
Start-up/Initial setup.
.
MU1H-0635GE51 R1016
3