Table of Contents
Advertisement
1. Connect the SCI-10 USB-LAN adapter from the installation kit to the
SRC-10 and the PC/laptop:
2. Plug the SCI-10 USB-LAN adapter into an available USB port on
the upper side of the SRC-10.
3. Turn on the PC/laptop. Connect the SCI-10 USB-LAN adapter to
the network port of the PC/laptop.
The setup wizard will start automatically in the browser window of your
laptop shortly after.
If the setup wizard does not start automatically, then please enter the
address
http://10.0.0.1
Follow the instructions of the setup wizard. If the LED on the side of
the SRC-10 has a steady GREEN light, then the SRC-10 connected
successfully to the customer's network, the Smile Connect, and
the internet.
MU1H-0635GE51 R1016
in the address bar of the browser.
38
Advertisement
Table of Contents
