Philips DVDR880/001 Service Manual page 51

STEP DESCRIPTION
15 The local display shows PINK NOISE ON. Press PLAY to start the test.
Press STOP to skip this nucleus.
16 The local display shows PINK NOISE OFF. Press PLAY to start the test.
Press STOP to skip this nucleus.
17 The local display shows SINE ON. Press PLAY to start the test.
Press STOP to stop the sine.
Press STOP to skip this nucleus.
18 The local display shows COLOUR-BAR OFF. Press PLAY to start the test.
Press STOP to skip this nucleus.
19 The local display shows BERESET. Press PLAY to start the test.
Press STOP to skip this nucleus.
20 The local display shows BETRAY OPEN. Press PLAY to start the test.
Press STOP to skip this nucleus.
21 The local display shows BETRAY CLOSE. Press PLAY to start the test.
Press STOP to skip this nucleus.
22 The local display shows BEWRITE READ. Press PLAY to start the test.
Press STOP to skip this nucleus.
23 The local display shows BETRAY OPEN. Press PLAY to start the test.
Press STOP to skip this nucleus.
24 The local display shows BETRAY CLOSE. Press PLAY to start the test.
Press STOP to skip this nucleus.
25 The local display shows READ ERRORLOG. Press PLAY to start the test.
Press STOP to skip this nucleus.
If the player test succeeded, the user/dealer script will start in an endless loop.
If the player test failed, the local display will display FAIL and the error code
Remark
In case of failure, the display shows " FAIL XXXXXX ". The
description of the shown error code can be retrieved in the
survey of Nuclei Error Codes (paragraph 5.4). Once an error
occurs, it is not possible to continue the player script. Unplug
the set and restart the player script. By pressing the STOP key,
it is possible to jump over the failure and to continue the player
script.
Diagnostic Software DVDR880-890 /0X1 5. EN 53
NUCLEUS
115
116
117
121
603
616
615
617
616
615
633