Table of Contents
Advertisement
MAINTENANCE
Cleaning the adapter
Wipe the adapter's exterior with a cloth slightly
moistened with mild detergent.
NOTICE: Never use hot water (hotter than 40°C
or 104°F), gasoline, naphtha, thinner, alcohol, etc.
Discoloration, deformation, or cracks may result.
Replacing the coin cell battery
NOTICE: The adapter's internal clock runs on power
supplied from the coin cell battery. To ensure that
the internal clock keeps the correct time, replace the
coin cell battery when the
"IDENTIFICATION OF PARTS") begins flashing
intermittently or rapidly.
NOTE: Be sure to reconfigure the adapter as the
settings saved on the adapter will be reset after the
battery is replaced.
Removal
1. Insert a flathead screwdriver into the battery
compartment slit (a). Pry the tab to release the lock
and then remove the cover.
2. While holding the adapter with the battery
compartment facing down, push in the tab (b)
and let the coin cell battery falls out onto a desk,
cardboard box, etc. so that it does not get lost.
Installation
3. While holding the adapter with the battery
compartment facing up, place the coin cell battery in
the battery holder (c) with the + side facing up.
Warning lamp (see
1.
2.
3.
21 ENGLISH
a
b
c
Advertisement
Table of Contents
