Table of Contents
Advertisement
9. Set the operation mode switch to the
10. Attach a battery cartridge to the adapter.
CAUTION: When installing battery cartridges, be
careful not to get your fingers caught between the
adapter and the battery cartridge.
Align the groove (a) on the battery cartridge with the
tongue (b) on the adapter and slide the cartridge
into place. Insert the battery cartridge all the way in
until it locks in place with a small click.
NOTICE: If you can see the red indicator (c) on the
upper side of the release button, the battery cartridge
is not completely locked.
The
Registration lamp will light up and the
adapter will beep when the transmission is
completed successfully.
NOTE: Do not detach the battery cartridge before the
adapter stops beeping.
NOTE: If the PIN codes set for the adapter and the
battery cartridge are not identical, the
lamp will flash and the settings will not be updated.
To transmit the same settings to other battery
cartridges
If necessary settings are saved to the adapter in
advance, the settings can be transmitted to battery
cartridges without using a mobile device or PC. For
details, see "Updating the battery cartridge settings
without using the apps."
To detach the battery cartridge
Slide the battery cartridge from the battery dock
while pressing the release button on the cartridge.
NOTE: To return to the "Home Menu" screen, tap
"BACK" twice.
position.
9.
10.
Warning
12 ENGLISH
a
b
c
Advertisement
Table of Contents
