Makita BPS01 Original Instructions Manual page 11

7. Tap "Transmit" to update the settings on the adapter.
8. Start communications.
On a mobile device
Hold the mobile device closely to the adapter so
that the / mark on the mobile device is facing
the NFC contact point.
The adapter will beep when the transmission is
completed successfully.
NOTE: Enable NFC in the settings on your mobile
device. For more information on the settings, see the
manual that came with the mobile device.
NOTE: To establish contactless communication, the
distance between the mobile device and the
contact point on the adapter should be less than 1 cm
(1/2 in.).
NOTE: If a communication error occurs, an error
message will appear on the app screen.
On a PC
The adapter will beep when the transmission is
completed successfully.
7.
8.
NFC
11 ENGLISH