Video Ports - Cisco EVM-IPVS-16A Connecting

Information About the EVM-IPVS-16A Network Module
Figure 1
EVM
IPVS-16A
Warning Equipment connected to outdoor cameras must be permanently grounded in accordance with national
and local codes. Statement 374
Hazardous voltages may be present in the outdoor camera cables under fault conditions. Disconnect
Warning
all cables from the outdoor cameras before servicing this equipment. Statement 376
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security. Statement
1017
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
The compact flash module installed in the EVM-IPVS-16A network module is not field-replaceable.
Note
For software-related prerequisites and restrictions, see the Cisco Analog Video Gateway 1.0 Installation
Note
and Upgrade Guide at:
http://www.cisco.com/en/US/docs/video/cavg/cavginstall/cavginstall.html.
For EVM-IPVS-16A network module features and benefits, supported hardware and software, and other
Note
product information, see the Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Data
Sheet.

Video Ports

16 video ports are provided, video ports 0 and 1 can be configured for input or output. The remaining 14
video ports can be configured for input only.
Connecting Cisco Analog Video Gateway Network Modules to the Network
2
Cisco Analog Video Gateway Network Module (EVM-IPVS-16A) Faceplate
20
3210
Connecting Cisco Analog Video Gateway Network Modules to the Network
11
1