Table of Contents
Advertisement
Port Range
Src Addr
Des Addr
Src Mask
Des Mask
Apply
Delete
Click the Add button if you want to add a new output rule.
Then enable out access, and click the Apply button.
So when devices execute to ping 192.168.1.118, system will deny the request to send ICMP request to
192.168.1.118 for the out access rule. But if devices ping other devices which network ID is 192.168.1.0,
it will be normal.
Set the filter Port range.
Set source address. It can be single IP address, network address,
complete address 0.0.0.0, or network address similar to *.*.*.0
Set the destination address. It can be IP address, network address,
complete address 0.0.0.0, or network address similar to *.*.*.*
Set the source address' mask. For example, 255.255.255.255 means just
point to one host; 255.255.255.0 means point to a network which
network ID is C type.
Set the destination address' mask. For example, 255.255.255.255 means
just point to one host; 255.255.255.0 means point to a network which
network ID is C type.
Save the settings.
Delete the selected rule.
74
Hide quick links:
Advertisement
Table of Contents
