3.
To change the Subnet mask, highlight the Subnet mask, press
the ENTER button.
Scroll up/down to change the number and left/right to move
between the components of the subnet mask. Press the ENTER
button to accept the changes, then press the ESC button to return
to the previous menu.
To return to the previous menu without accepting the changes,
press the ESC button.
4.
To save your changes, scroll down to the Network Service option
and press the ENTER button.
Wireless
This section will only describe the menu option: Connection Mode. The
procedure for connecting the MVCI in wireless mode is described in
the Section: Wireless Network Setup.
1.
To change the wireless network settings, select Wireless,
press the ENTER button.
48