Connecting to the Vehicle
1.
Connect the Vehicle Cable to the MVCI and to the Diagnostic Link
Connector on the vehicle.
2.
The MVCI will power on automatically when power is received
through the vehicle Diagnostic Link Connector.
3.
To turn off the MVCI, disconnect from the vehicle Diagnostic Link
Connector, press the ESC button for 5 seconds. The MVCI will
also automatically power off in 60 seconds when disconnected
from an external power source.
NOTE: To reset the MVCI, press ESC until the MVCI restarts
(approximately 6 seconds) while the MVCI is connected to any
external power source.
20