Mvci Driver Installation - Honda SPX MVCI User Manual

MVCI Driver Installation

NOTE: The MVCI Application (see previous page) must be
installed before installing the MVCI Driver. The installed folder
SPX must be on your PC main drive
1. Plug the external power supply into the MVCI to boot it up.
The following screen will appear.
2. Using the USB cable supplied with the MVCI, connect the MVCI
to your PC.
If you are running Windows XP, begin your set up with Step 3:
If you are running Windows Vista, begin your set up with Step 8:
3. The "Found New Hardware Wizard" screen will appear. At the
"search for software?" question, select the "No, not this time"
option. Click Next.
12
(C:\SPX).