Sdio-1; Sdio-2 - Honda SPX MVCI User Manual

SDIO-1

1. To enable/disable the SDIO-1 card slot on the MVCI, select SDIO-
1. The current status of the SDIO-1 card slot is displayed in the
MVCI Setup menu.
NOTE: This option should typically be left at the factory default
setting (enabled).
2. To change the card slot status, scroll up/down to move the cursor
over the desired option. Press ENTER to save the change or
ESC to cancel.

SDIO-2

1. To enable/disable the SDIO-2 card slot on the MVCI, select SDIO-
2. The current status of the SDIO-2 card slot is displayed in the
MVCI Setup menu.
NOTE: This option should typically be left at the factory default
setting (enabled).
2. To change the card slot status, scroll up/down to move the cursor
over the desired option. Press ENTER to save the change or
ESC to cancel.
41