Installing The Cisco Cbr-8 In A Rack - Cisco cBR-8 Installation Instructions Manual

Installing the Cisco cBR-8 In a Rack

Rack mount the chassis by securing the rack-mount brackets to two posts or mounting strips in the rack. Use at least four rack-mount
screws on each side to fasten the two rack-mount brackets to the rack posts because the rack-mount brackets support the weight of
the entire chassis.
You can install the chassis in either a
Before You Begin
1 Verify rack dimensions.
2 Install chassis installation
3 Attach the chassis rack-mount
Install the chassis installation handle
4
Warning To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions
to ensure that the system remains stable. The following guidelines are provided to ensure your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the
heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Installing the Cisco cBR in a Four-Post Rack
Procedure
Step 1 Ensure that all screw fasteners on the installed components are securely tightened on the chassis.
Step 2 Ensure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are engaged or the rack
is stabilized.
Step 3 With two or more people, lift the chassis (partially unloaded) into position between the rack posts and rest it on the chassis
installation bracket. The chassis can be lifted using the installation handle, the two large side handles, the rear Power entry
four-post rack unit or a
brackets.
brackets.
(optional).
two-post rack unit.
9