Snmp Traps - Cisco ASR 5500 Installation Manual

▀ Circuit Cards

SNMP Traps

The ASR 5500 supports SNMP traps that are triggered when conditions indicate status changes on application cards.
To display SNMP trap statistics, run the show snmp trap statistics command. A sample output appears below.
[local]asr5500# show snmp trap statistics
SNMP Notification Statistics:
Total number of notifications
Last notification sent
Notification sending is
Notifications have never been disabled
Notifications have never been cleared
Notifications in current period : 0
Notifications in previous period: 0
Notification monitor period
Trap Name
----------------------------------- ----- ----- ------- --------------------
CardUp
PortLinkDow
CLISessStart
CardActive
CardStandby
PortDown
Total number of notifications Disabled
Important:
Replacement UMIOs and UDPCs
UMIO cards and UDPCs are functional replacements for MIOs and DPCs. However, special chassis and card licenses
may be required in order for the UMIO or UDPC to operate. For additional information, refer to Chassis, UMIO and
UDPC License Requirements.
Backing Up the System Configuration
Prior to replacing a failed card of any type, it is good practice to save the current configuration to an external USB
device or remote network location.
Refer to Verifying and Saving Your Configuration in the System Administration Guide for detailed instructions
Synchronize File System
To assure that the configuration files on both MIO/UMIOs are identical, run the Exec mode filesystem synchronize all
command.
▄ ASR 5500 Installation Guide
138
Run the show snmp trap history command to view recently sent SNMP traps.
: 13
: Friday July 29 13:46:38 us-eastern 2011
: enabled
: 300 seconds
#Gen #Disc Disable Last Generated
4 0
2 0
1 0
1 0
3 0
2 0
: 0
Replaceable Components
0 2011:07:29:13:46:35
0 2011:07:29:13:46:38
0 2011:07:29:13:46:37
0 2011:07:29:13:46:20
0 2011:07:29:13:46:35
0 2011:07:29:13:46:38