Preparing For Appliance Installation - Cisco 380 Series Hardware Installation Manual

Hide thumbs

Table of Contents

Installation Overview

To prepare for the installation of the Cisco 380 and Cisco 680 series appliance, perform the following

steps:

Step

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Unpacking and Inspecting the Appliance

Caution

Do NOT open the appliance. Doing so violates your support agreement. The appliance does not contain

any serviceable components.

Keep the shipping container in case the appliance requires shipping in the future.

Tip

The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or

Note

any items are missing, contact your customer service representative immediately.

To inspect the shipment, follow these steps:

Remove the appliance from its cardboard container and save all packaging material.

Step 1

Step 2

Compare the shipment to the equipment list provided by your customer service representative. Verify

that you have all items.

Cisco 380 and Cisco 680 Series Hardware Installation Guide

2-2

Do This

Review the safety precautions outlined in the

Safety and Compliance Guide.

Read the appropriate Cisco AsyncOS release

notes for the Cisco 380 and Cisco 680 series

appliance(s).

Unpack the appliance.

Place the appliance on a stable work surface. --

View installation guidelines, rack

requirements, and equipment requirements.

Mount the appliance with the provided slide

rails.

Establish network connectivity.

For additional information on pre-installation

and post-installation tasks, review the

hardware Quick Start Guides.

More Information

http://www.cisco.com/en/US/docs/unified_c

omputing/ucs/c/regulatory/compliance/cseri

es_regulatory_compliance_information.html

For the

Cisco

ESA,

Cisco

Cisco WSA

Unpacking and Inspecting the Appliance,

page

2-2.