Ipsec Peer Identity - Draytek Vigor2132 Series User Manual

IPSec Security Method
After finishing all the settings here, please click OK to save the configuration.
4 . 1 2 . 4 I P S e c P e e
4 . 1 2 . 4 I P S e c P e e
To use digital certificate for peer authentication in either LAN-to-LAN connection or Remote
User Dial-In connection, here you may edit a table of peer certificate for selection. As shown
below, the router provides 32 entries of digital certificates for peer dial-in users.
Available settings are explained as follows:
Item
Set to Factory Default
Index
Name
Pre-Shared Key- Specify a key for IKE authentication.
Confirm Pre-Shared Key- Retype the characters to
confirm the pre-shared key.
Note: Any packets from the remote dial-in user which does
not match the rule defined in VPN and Remote
Access>>Remote Dial-In User will be applied with the
method specified here.
Medium - Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option
is active.
High (ESP) - Encapsulating Security Payload (ESP) means
payload (data) will be encrypted and authenticated. You
may select encryption algorithm from Data Encryption
Standard (DES), Triple DES (3DES), and AES.
r I d e n t i t y
r I d e n t i t y
Description
Click it to clear all indexes.
Click the number below Index to access into the setting
page of IPSec Peer Identity.
Display the profile name of that index.
305
Vigor2132 Series User's Guide