Honeywell KMD-150 Pilot's Manual page 26

General Information
GPS STATUS
strength, allows UTC, local offset, date and position to be set, which will
speed up the initialization of your unit.
DATA I/O
input/output settings and status.
STORMSCOPE If a WX-500 Stormscope is interfaced; this shows a
Stormscope style display of the local thunderstorm activity.
FLIGHT PLAN
be edited/created.
EDIT FPLN
either manually or visually.
USER WPTS
marker functions to be edited/created either manually or visually.
DEMO MODE
using a built in simulator. This is available only on units with an internal
GPS active.
NOTE PAD
loaded from a PC using Flight Manager(tm) software to be viewed. This
key in only available if DEMO MODE is not running. DEMO MODE can
only be selected from the first screen when switching on the unit.
E6-B CALC
TAS/WIND
NAV
TRIP/FUEL
SUNSET/RISE Allows sunset and sunrise times to be calculated.
SETUP
acteristics.
MAP SETUP
map tracking, airport names, map units, map datum, language, minimum
runway length/surface, extended track, auto zoom and zoom level map
de-clutter facility.
NAV SETUP
including CDI scale, CDI display, CDI alarm, arrival alarm, auto next
leg/leg selection philosophy, turn anticipation and logging rate.
Rev 1 Mar/2000
If using the internal GPS, this shows satellite signal
If using an external GPS, this shows the data
Allows user defined user waypoints and flight plans to
Allows user defined flight plans to be edited /created
Allows user defined user waypoints, airports and
Allows you to practice operating the unit on the ground
Allows up to 4000 characters of text, previously down-
Allows the E6-B Calculator to be used.
Allows density altitude, TAS and winds aloft to be
calculated.
Allows vertical navigation to be Setup.
Allows fuel and trip information to be calculated.
Allows Setup of map, navigation and input/output char-
Allows all map functions to be customized, including
Allows all the NAV functions to be customized,
12
KMD 150 Pilot's Guide