Pin Lock Warning; Lock Out Warning; Screen 54: Power On Security Pin Entry Screen; Screen 55: Lockout Screen - Honeywell KMD-150 Pilot's Manual

Warning Screens

PIN LOCK WARNING

If the Auto Power-On
Lock function has been
activated on Screen 26,
this Screen will be called
during initialization. You
must then input the cor-
rect PIN before you are
allowed to move back to
Screen 1 with full access
to all functions.
If an incorrect PIN is
entered, Screen 25 will
Screen 54: Power On Security PIN Entry
appear and Key 1 will
Screen
revert to this Screen. If an
incorrect PIN is entered on three consecutive attempts, even if the unit
has been switched off and back on again between attempts, Screen 55
will appear. The number of incorrect attempts that have been made is
stored in NVM and increased with each incorrect attempt or cleared
down once you have managed to enter the correct PIN.
As the PIN is entered, asterisk characters are displayed in place of the
question marks. Key 1 can be used as a Back-Space Key.

LOCK OUT WARNING

This Screen will only
appear after three incor-
rect PIN's have been
entered on Screen 54 (or
if when you switch the
unit on the NVM is found
to have accumulated
three unsuccessful PIN
input attempts).
The LOCK OUT number
is a random five digit
number that the unit gen-

Screen 55: Lockout Screen

erates. This is held in
RAM and does not change until an unlock number is entered. The unit
can be switched off and on with this Screen showing but the LOCK OUT
number will remain the same.
If you get locked out of the unit, in order to re-activate the unit, you will
need to telephone Honeywell or your local Bendix/King dealer (or
132
Rev 1 Mar/2000
KMD 150 Pilot's Guide