5.5.2
Active Event History
The Active Events screen lists the current event history in the order that the events occurred, and in colour (Red, Yellow,
Orange and Grey) to highlight the severity. TPPR has the option to filter the history into categories, and this is described in
Ch.6.8 Responding to Alarms, Faults and Warnings.
5.5.3
Touchscreen Layout
The two main Touchscreen displays are shown in the figure below. The top row shows touch sensitive icons as described in
Chapter 17.
Active events may be accompanied by external beacons, sounders and other events depending on your system setup. You
can touch each of the alarms, faults or warnings to see what the issue is and to acknowledge them as described later on.
Pt. No. 2400M2566_1_EN
NORMAL OPERATION
Figure 31.
System Status Normal
Figure 32.
System Status with Example Active Events
29
Touchpoint Pro
Operating Manual