Wireless-G PrintServer with Multifunction Printer Support
12. The Set PrintServer's Password screen appears. If you want to change your password, enter your current
password in the Password field. Enter the new password in the Confirm field.
Click Next to continue, or click Back to return to the previous screen.
13. Locate and select the wireless network you want to connect to. If you do not see the wireless network you
wish to use, click Refresh and locate the network.
Click Next to continue, or click Back to return to the previous screen.
Chapter 4: Configuring the PrintServer Using the Setup Wizard
Installation
Figure 4-11: Set PrintServer Password
Figure 4-12: Select Wireless Network
13