Filtered and chilled drinking water for commercial kitchens (16 pages)
Summary of Contents for Zip Classic HydroTap G4 range
Page 1
Installation instructions Zip HydroTap G4 ® Filtered and chilled drinking water for residential kitchens. VENTILATION IS ESSENTIAL Affix model number label here 802261UK READ SECTION 2 'VENTILATION' READ BEFORE YOU START 802261UK - HT G4 Residential chilled installation instructions - Sept 2016 - V2.05...
Page 2
Tap options The G4 series offers a range of interchangeable taps to suit the customer's needs Classic HydroTap G4 range ® These standalone taps are directly compatible with the G4 Command-Centre Arc / Cube HydroTap G4 range ® Elite HydroTap G4range ®...
Index HydroTap G4 specifications ® Installation check list ........................4 General product features ......................5 Important safety instructions ......................6 Warnings and regulatory information ................... 7 Major components and accessories ..................... 8 Technical specifications ....................... 9 Before installation and site requirements ..................10 Installation instructions Step 1 - Measure and cut all the tap holes, fit the taps : Refer to 803341UK Tap installation...
Installation checklist Before installation • Read the instructions and check if there is adequate space to install all of the components. • Note Not all fittings are supplied with the appliance kit. Isolation valves are not supplied. • Check the mains water pressure is within min / max requirements (see page 9). • Note This product must be fitted to a potable water supply.
General product features Thank you for purchasing a Zip HydroTap G4. Please read and follow these instructions carefully to ensure ® safe and trouble free operation. If help and advice is required, please call 0345 6 005 005. What is the Zip HydroTap G4 ? ®...
Important safety instructions This manual contains important safety and installation instructions for the Zip HydroTap ® Please read all warnings, installation requirements and installation instructions before installing any Zip HydroTap G4. This system must be installed in accordance with water supply byelaws, ®...
• All installation and service work must be completed by trained and suitably qualified tradespeople. Faulty operation due to unqualified persons working on this product, or any other Zip product may void warranty coverage. • As the installer, it is your responsibility to supply (if necessary) and install all valves as required by local regulations and relevant standards.
SPIDER BCH240/175G4 CLAMP AV160/125G4 required. (One GPO is for the Zip HydroTap and the other for the Booster heater). NOTE: feed each of the three tubes and guide NOTE: Check the cable lengths and outlet positions before proceeding. electrical cable evenly in between the legs of...
Technical specifications Commercial Chilled HydroTap G4 range ® Refer to 803341UK Tap installation instructions (for Arc / Cube also refer to the tube kit assembly instructions) supplied with the tap. HydroTap ® Chilled and filtered. HydroTap s with mixer taps ®...
See Technical specification, page 9 for dimensions. See sections 1 to 2, pages 11 to 12 for installation instructions. • For Zip HydroTap G Chilled models, 1 x 220-240V AC, 13A socket will be ®...
Section 1 Ventilation 1.1 Ventilation for all models • The clearance envelope dimensions stated in the Specification sheets and Installation instructions must be observed. • Adequate ventilation must be provided to ensure that the cupboard space temperature does not exceed 1.2 Preferred arrangement 4mm door buffers (at the four corners of each door) supplied with the Command-Centre should be used to...
Section 2 Command-Centre installation 2.1 HydroTap G4 chilled models Refer to 803341UK Tap installation instructions (for Arc / Cube ® also refer to the tube kit assembly instructions) supplied with the tap. Elite Classic Arc / Cube Braided hose fitting Install the mains water braided hose to the Command-Centre before locating in place.
Page 13
Installation instructions 2.2 Chilled and mixed hot & cold Refer to 803341UK Tap installation instructions supplied with the tap. Celsius Arc Celsius Cube CHILLED MAINS POWER OUTLET CABLE Note Mains hose length is 750mm. Electrical power cable length is 3.0m nom. Position the Command-Centre according to the hose and cable lengths supplied.
User manual. 3.1 Select the language Language selection screen Initial commissioning screen Zip Chilled Zip Chilled 3.2 Filter flush Have a bucket or similar container (not supplied) at the ready to hold a quantity of water that will be ejected while the filter flush mode is in operation.
Internal fault Call Zip Service Call an electrician, a plumber, or Zip on 0345 6 005 005 for assistance, service, spare parts or enquiries. End of life disposal The use of this crossed out wheeled bin logo indicates that this product needs to be disposed of separately to any other household waste.
Furthermore this warranty does not displace any statutory warranty, but, to the extent to which Zip is entitled to do so, the liability of Zip under any statutory warranty will be limited at Zip’s option to the replacement of the...