Zip HydroTap G4 User Manual
Filtered boiling and chilled drinking water.
Hide thumbs
Also See for HydroTap G4:
- User manual (560 pages) ,
- Installation instructions manual (40 pages) ,
- Installation and operating instructions manual (28 pages)
Related Manuals for Zip HydroTap G4
Summary of Contents for Zip HydroTap G4
- Page 1 ZIP HydroTap G4 ® User Guide Affix model number label here 801623UK 801623UK - HT G4 Commercial Chilled User Guide - Jan 2016 - V2.02 Page 1 of 16...
- Page 2 Table of contents • Tap operation ........... Pages 2 to 3 • Tap lights ..........Page 4 • LCD screen & menu ......... Pages 5 to 14 • Filter maintenance ........Pages 14 to 15 • Home menu icons ........Page 16 • Cleaning ............
- Page 3 Tap operation Elite The Elite tap uses touch Chilled buttons sensitive controls to dispense chilled water. When operating the tap ensure the touch surface is dry as moisture may interfere with the sensor touch control. Elite Arc / Cube On powerup, wait 30secs. for the unit to calibrate.
- Page 4 Tap lights Blue CHILLED water lights Continually illuminated all models Blue lights This indicates that the temperature of the Filter light chilled water is within the set temperature range. Flashing slowly all models This indicates that the chilled water is not within the set temperature range.
- Page 5 LCD Screen Zip HydroTap G4 features a ‘TOUCH’ screen for easy setup and operation ® adjustment. (See page 16 for home menu icons). **Status window NORMAL Chilled water set temp. Filter usage Other possible messages in status window: **Status Information...
- Page 6 LCD Screen menu Main Sub menu Sub menu Section menu options Language English / Deutsch • Product info. • Module Revision Serial number Information Product number • Filters log • Filters • System faults • Faults found • Filter flush • Start/Stop Installation • Filter reset...
- Page 7 LCD Screen operation - Section A A. Set language • Press the [MENU] button for main menu. • Press the [Language] button. • Select the language. • Press [<=] button for the previous menu. LCD Screen operation - Section B B.
- Page 8 LCD Screen operation - Section C LCD Screen operation - Section C C. Install Once your Zip HydroTap G4 unit has been installed, Go to the install menu to ® configure the system settings for your product. Sub menu 1. - Filter flush.
- Page 9 This can only be done by a Zip technician. Please contact your Zip service provider for further assistance.
- Page 10 LCD Screen operation - Section E E. Security The Zip HydroTap G4 allows the appliance coordinator to set up a password ® to protect against users changing the preferred system settings. To set a password • Press the [MENU] button for main menu.
- Page 11 • To adjust the temperature, press the temperature button and then use the up and down arrows. Filter Zip HydroTap G4 allows the user to adjust filter life and edit filter usage. ® To edit the filter life • Press the [MENU] button for main menu.
- Page 12 LCD Screen operation - Section G • To change filter life, first select (Litres) or (Months) then press the up or down arrows to edit filter life. Note Filter life increases in 500 litres increments to a maximum of 10000 litres.
- Page 13 LCD Screen operation - Section G It is recommended to recalibrate the lux sensor after selecting any of the lux sensor options from the sleep mode menu. (See page 9 ,Lux sensor calibration).(Classic, Arc / Cube only). Note Any attempt, during off mode, to dispense water, will bring the unit out of sleep mode.
-
Page 14: Water Filter
LCD Screen operation - Section G Dispense Times The ability to change the maximum dispensing time for cold water has been introduced. The default settings for the maximum dispensing times is 15 seconds. The operator may change the chilled dispensing time from 5 to 15 seconds, in increments of 1 second. - Page 15 Close the door to secure the appliance. • Adjust the filter settings in section G (see Filter, pages 11-12 litres and days. Warning: If the Zip HydroTap G4 is switched off for ® a long period of time (e.g. more...
- Page 16 Telephone: 0845 6 005 005 Mobile: 0345 6 005 005 As Zip policy is one of continuous product improvement, changes to specifications may be made without prior notice. Images in this booklet have been modified and may not be true representations of the finished goods.