Makita DCL180 Instruction Manual page 9

2
► 1. Groove of cleaner housing 2. Preilter 3. Securing
lip
Reassembly for high performance
ilter
Connect high performance ilter. At this time, make sure
to twist high performance ilter so that securing lip is
irmly locked into cleaner unit.
1
► 1. High performance ilter 2. Securing lip
1
► 1. Securing lip
Connect capsule. Align O symbol on capsule with O
symbol on handle and then irmly twist capsule in direc-
tion of arrow until it is secured.
3
1
2
► 1. O Mark
► 1. Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that high performance
ilter is loaded correctly prior to using cleaner. If
they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, high perfor-
mance ilter is not loaded correctly. Reload them
correctly to rectify problem.
Problem Examples
Securing lip of high performance ilter is not irmly
locked into groove of cleaner housing.
► 1. Securing lip 2. Groove of cleaner housing
9 ENGLISH
1
1
1
2
2