Makita DCL180 Instruction Manual page 8

Connect capsule. Align O symbol on capsule with O
symbol on handle and then irmly twist capsule in direc-
tion of arrow until it is secured.
1
► 1. O Mark
► 1. Handle 2. Capsule
NOTE:
• Always remove dust ahead of time, as suction
power will be reduced if there is too much dust
in cleaner.
• Always be sure to check that both ilter and pre-
ilter are loaded correctly prior to using cleaner.
If they are not loaded correctly, dust will get into
the motor housing, and cause motor failure.
If the following examples occur, ilter and preil-
ter are not loaded correctly. Reload them cor-
rectly to rectify problem.
Problem Examples
Example 1: Only preilter has been loaded (no ilter)
► 1. Preilter
Example 2: Only ilter has been loaded (no preilter)
► 1. Filter
1
Example 3: Filter has been loaded in a peeled back
state
2
► 1. Filter
Example 4: Preilter's securing lip is not irmly locked
into groove of cleaner housing
8 ENGLISH
1
1
1