Makita 4323 Instruction Manual page 7

Hex wrench storage
When not in use, the hex wrench can be
conveniently stored as shown in the figure.
Dust cover
CAUTION:
Always wear safety goggles even when operating the tool with the dust cover lowered
Lower the dust cover to prevent chips from
flying. However, when making bevel cuts,
raise it all the way.
Switch action
CAUTION:
Before plugging in the tool, always check to see that the switch trigger actuates properly
and returns to the "OFF" position when released
To start the tool, simply pull the trigger.
Release the trigger to stop. For continuous
operation, pull the trigger and then push in
the lock button.
To stop the tool from the locked position,
pull the trigger fully, then release it.
Lock button
1
Switch trigger
7