RIDGID 20168 Operator's Manual page 5

reduce the risk of electric shock and equipment
damage.
•
Store idle tools out of the reach of children
and other untrained persons. Tools are
dangerous in the hands of untrained users.
•
Maintain tools with care. Properly maintained
tools are less likely to cause injury.
•
Check for breakage of parts, and any other
conditions that may affect the transmitter's
operation. If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
•
Use only accessories that are recommended
by the
Accessories that may be suitable for one tool
may become hazardous when used on another
tool.
•
Keep handles dry and clean; free from oil
and grease. Allows for better control of the tool.
•
Protect against excessive heat. The product
should be situated away from heat sources
such as radiators, heat registers, stoves, or
other products
produce heat.
Service
•
Tool service must be performed only by
qualified
maintenance performed by unqualified repair
personnel could result in injury.
•
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance Section of this manual. Use of
unauthorized
maintenance instructions may create a risk of
electrical shock or injury.
•
Follow
accessories. Accidents are caused by poorly
maintained tools.
•
Provide proper cleaning. Remove battery
before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for
cleaning.
•
Conduct a safety check. Upon completion of
any service or repair of this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
•
Damage to the product that requires service.
Remove the batteries and refer servicing to
1.800.561.8187
NaviTrack Brick Line Transmitter
manufacturer for your
(including amplifiers)
repair personnel. Service
parts or failure to
instructions for changing
www.
qualified service personnel under any of the
following conditions:
o If liquid has been spilled or objects have
fallen into product;
o If product does not operate normally by
following the operating instructions;
o If the product has been dropped or
damaged in any way;
o If the product exhibits a distinct change in
performance.
Remove batteries entirely before shipping.
tool.
that
or
Important Notice
follow
The NaviTrack Brick is intended for use with a
NaviTrack
diagnostic tool that senses electromagnetic fields
emitted by objects underground. It is meant to aide
the user in locating these objects by recognizing
characteristics of the field lines and displaying them
on the screen. As electromagnetic field lines can be
distorted and interfered with, it is important to verify
the location of underground objects before digging.
Several utilities may be underground in the
same area. Be sure to follow local guidelines
and one-call service procedures.
Exposing the utility is the only way to verify its
existence, location, and depth.
Ridge Tool Co., its affiliates and suppliers, will
not be liable for any injury or any direct,
indirect, incidental, or consequential damages
sustained or incurred by reason of the use of
the NaviTrack Brick transmitter.
.com
CAUTION
DANGER
locator/reciever. The locator
information@itm.com
is a