Interface - Cisco Catalyst 3650 series Command Reference Manual

interface

interface
To configure an interface, use the interface command.
interface {Auto-Template Auto-Template interface-number | GigabitEthernet Gigabit Ethernet interface
number | Group VI Group VI interface number Internal Interface Internal Interface number Loopback
Loopback interface number Null Null interface number Port-channel interface number Port-channel
interface number TenGigabitEthernet interface number Tunnel interface number Vlan interface number
}
Syntax Description
Auto-Template Auto-template
interface-number
GigabitEthernet Gigabit Ethernet interface
number
Group VI Group VI interface number
Internal Interface Internal Interface
Loopback Loopback Interface number
Null Null interface number
Port-channel interface number
TenGigabitEthernet interface number
Tunnel interface number
Vlan interface number
Command Default
None
Command Modes
Global configuration
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
42
Enables you to configure a auto-template interface. The range
is 1 to 999.
Enables you to configure a Gigabit Ethernet IEEE 802.3z
interface. The range is from 0 to 9.
Enables you to configure a Group VI interface. The range is
from 0 to 9.
Enables you to configure an internal interface.
Enables you to configure a loopback interface. The range is
from 0 to 2147483647.
Enables you to configure a null interface. The default value is
0.
Enables you to configure a port-channel interface. The range
is from 1 to 128.
Enables you to configure a 10-Gigabit Ethernet interface. The
range is from 0 to 9.
Enables you to configure a tunnel interface. The range is from
0 to 2147483647.
Enables you to configure a switch VLAN. The range is from 0
to 4098.