Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Usage Guidelines
The command options marked with an asterisk in the table above have subcommands. For more information
on these subcommands, see the Related Commands section below.
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
When supported, use the snmp-server enable traps command to enable sending of traps or informs.
Note
Though visible in the command-line help strings, the fru-ctrl, insertion, and removal keywords are not
supported on the device. The snmp-server enable informs global configuration command is not supported.
To enable the sending of SNMP inform notifications, use the snmp-server enable traps global
configuration command combined with the snmp-server host host-addr informs global configuration
command.
Informs are not supported in SNMPv1.
Note
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
Examples
This example shows how to enable more than one type of SNMP trap:
Device(config)# snmp-server enable traps cluster
Device(config)# snmp-server enable traps config
Device(config)# snmp-server enable traps vtp
Related Commands
Command
snmp-server enable traps bridge
snmp-server enable traps bulkstat
snmp-server enable traps call-home
snmp-server enable traps cef
snmp-server enable traps cpu
snmp-server enable traps envmon
snmp-server enable traps errdisable
snmp-server enable traps flash
snmp-server enable traps isis
Description
Generates STP bridge MIB traps.
Enables data-collection-MIB notifications.
Enables SNMP CISCO-CALLHOME-MIB traps.
Enables SNMP CEF traps.
Enables CPU notifications.
Enables SNMP environmental traps.
Enables SNMP errdisable notifications.
Enables SNMP flash notifications.
Enables IS-IS traps.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
snmp-server enable traps
533
Advertisement
Table of Contents
