RIDGID seesnake compact2 Operator's Manual page 19

The SeeSnake CS6Pak is specifically designed to mount
onto the Compact2 and is sold with a compatible docking
handle installed. The Compact2 can also be used with a
retrofitted SeeSnake MiniPak using the Docking Handle
Kit, sold separately.
To make using the setup pictured bottom right most prac-
tical, press the Image Flip key
seconds to rotate the user interface. Repeat to return the
screen to its normal viewing mode.
Note: Refer to the Docking Handle Kit for instructions on
how to install the docking handle.
Find Quality Products Online at:
on the CS6Pak for 3
GlobalTestSupply
www.
Mounting the Monitor
1. Turn the docking joints on sides of the docking han-
dle so that the openings point down.
Front Handle
2. Center the CS6Pak over the docking fins and align
the docking joints with the joint sockets on the dock-
ing fins.
Joint Sockets
Docking Fins
3. Firmly push the monitor down into the docking sys-
tem until you feel the monitor lock into place.
.com
sales@GlobalTestSupply.com
Docking Handle
Docking Joint
Quick-Release Knob
English – 19