Connecting To A Seesnake Monitor - RIDGID seesnake compact2 Operator's Manual

Docking System
The Compact2 comes with a docking system assembly
installed so that a compatible monitor can be mounted
onto the reel for easy transport. Tilt the docked monitor
to the desired viewing angle or easily remove it from the
dock for convenient placement in your work area. The
docking system assembly is removable.
Note: Refer to the Docking System section for instruc-
tions on how to mount and remove a compatible monitor.
Joint Sockets
Docking Fins
Find Quality Products Online at:
Quick-Release Knob
GlobalTestSupply
www.

Connecting to a SeeSnake Monitor

The Compact2 can connect to any SeeSnake monitor
with the SeeSnake system cable.
1. Unwrap the system cable from the cable wraps.
2. Pull back the outer locking sleeve on the system
cable connector.
3. Align the connector ridge and plastic guide pin with
the socket and push the connector straight in.
4. Tighten the outer locking sleeve.
Only twist the outer locking sleeve. To
NOTICE
prevent damage to the pins, never bend
or twist the connector.
Connector Ridge
Outer Locking Sleeve
5. Power on the system:
• Press the Power key
• On a digital reporting monitor, press the Autolog
key to quick-start an inspection.
Note: For some digital reporting monitors, a USB drive
must be inserted to capture media. Refer to the moni-
tor's manual for more information about the benefits of
Autolog video recordings.
.com
sales@GlobalTestSupply.com
Guide Pin
Socket
to power on the system.
English – 11