Dell S3048-ON Configuration Manual page 267

• Modify the threshold for monitoring ECMP group bundles.
CONFIGURATION mode
link-bundle-distribution trigger-threshold {percent}
The range is from 1 to 90%.
The default is 60%.
• Display details for an ECMP group bundle.
EXEC mode
show link-bundle-distribution ecmp-group ecmp-group-id
The range is from 1 to 64.
Viewing an ECMP Group
NOTE: An ecmp-group index is generated automatically for each unique ecmp-group when you configure multipath routes to the
same network. The system can generate a maximum of 512 unique ecmp-groups. The ecmp-group indices are generated in even
numbers (0, 2, 4, 6... 1022) and are for information only.
You can configure ecmp-group with id 2 for link bundle monitoring. This ecmp-group is different from the ecmp-group index 2 that is
created by configuring routes and is automatically generated. These two ecmp-groups are not related in any way.
Dell(conf-ecmp-group-5)#show config
!
ecmp-group 5
interface gigabitethernet 1/2
interface gigabitethernet 1/3
link-bundle-monitor enable
Dell(conf-ecmp-group-5)#
Equal Cost Multi-Path (ECMP) 267