Installing The Adapter - D-Link DXE-810T Manual

If you do not have AutoPlay enabled for your PC's CD-ROM drive, navigate to the root directory of the CD
drive using Windows Explorer and double-click Autorun.exe. In the new window, click the Install Driver link
to install the driver for the NIC.
The CD-ROM included with your DXE-810T is designed to make installing required software a painless and
trouble-free process. Simply click on the Install Drivers link, and an Installation Wizard will guide you through
the process, no matter which operating system you're running. The included Adobe Acrobat Reader, which is
needed to read or print out your user manual, will also come in handy for many other applications.
Simply follow the directions in the wizard, and your DXE-810T will be installed successfully in just a few
minutes, allowing you to enjoy the many advantages of connecting to an Ethernet LAN.
After the driver installation program is complete, you can then power off your computer and install the PCI
Express card. Once you restart your PC, the DXE-810T will be ready to use.

Installing the Adapter

1. Shut down the computer, unplug its power cord, and remove the chassis cover.
(Important: Opening the case of your computer may compromise its warranty. Consult the computer
manufacturer before opening the case to ensure that you adhere to warranty guidelines. In some cases,
you may need to have the DXE-810T installed by your computer manufacturer's service technician.)
2. Insert the contact edge of the DXE-810T card into the connector of any available PCI Express Bus
Master expansion slot. Press the card firmly into the connector such that the card's contacts are fully
seated in the connector.
3. Install the bracket screw that secures the card to the computer chassis.
4. Reinstall the computer's chassis cover.
5. Reconnect the computer's power cord, and switch on the computer's power.
Changing the Link Speed Manually
1. Windows:
User can choose speed values in Advanced Properties as shown below.
5