Table of Contents
Advertisement
Linux kernel 2.6.x - 3.x.x
VMware ESXi 5.x, 6.0 (net-tn40xx-0.3.6.12.1.x86_64.vib)
Unpack and Inspect
CAUTION:
Under ordinary circumstances, the DXE-810T card will not be affected by static discharge caused by
contact with a person's body while handling the unit. In special circumstances, the user may carry an
extraordinarily high static charge so it is good practice to disperse the charge by touching a ground
before handling the adapter card.
Open the shipping carton and carefully remove all items. Ensure that the following items are included:
One DXE-810T PCI Express 10 Gigabit Ethernet Adapter Card
DXE-810T drivers and manual on a CD-ROM
If any of these items are missing or damaged, please contact your local reseller for a replacement.
Software Installation for Linux
1. Make clean
2. Sudo make
3. Sudo make install
4. Reboot the system
Software Installation for VMware ESXi 5.x, 6.0
1. Copy the VIB file (net-tn40xx-0.3.6.12.1.x86_64.vib) to the VMware server:
2. On the VMware server shell type:
esxcli software acceptance set --level CommunitySupported
esxcli software vib install -v /net-tn40xx-0.3.6.12.1.x86_64.vib
3. Reboot the VMware server
Software Installation
You must first install the driver software for your DXE-810T before installing the PCI Express card into your
PC. Insert the CD into your PC's CD-ROM drive. The driver installation program will run automatically if you
have AutoPlay enabled.
4
2
Installation
Advertisement
Table of Contents
