D-Link DXE-810T Manual page 12

Single port 10gbase-t rj45 pci express adapter
Hide thumbs Also See for DXE-810T:
Table of Contents

Advertisement

Driver Advanced Properties Tab: Configure RSS parameters to define RSS state and cores to be used for
RX traffic processing.
TCP/IP Full Offload
The DXE-810T does not use Windows Chimney interface, therefore, it is recommended to disable it during
stress-testing:
Command Prompt:
netsh interface tcp set global chimney=disabled
Auto-Tuning
From Windows Vista and on, Microsoft introduced a new TCP management option called Windows Auto-
Tuning. This configuration, which is enabled by default in modern systems, gives Windows OS the
permission to automatically manage TCP connection parameters for better WAN performance.
Administrators should disable this function before stress-testing.
Command Prompt:
netsh interface tcp set global autotuninglevel=disabled
http://www.speedguide.net/articles/windows-7-vista-2008-tweaks-2574
Network Throttling Index
Windows OS implements a restriction mechanism for processing non-multimedia network traffic.
The following registry key configures this index:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\Multimedia\SystemProfile NetworkThrottlingIndex=ffffffff (DWORD)
It is recommended to change the default 0x10 to 0xFFFF_FFFF for maximum throughput.
http://www.speedguide.net/articles/windows-7-vista-2008-tweaks-2574
Linux OS
For best results, it is recommended that a fresh copy of the OS and all updates are installed.
Firewall
For uninterrupted benchmark testing, the best practice is to first disable active firewalls. Please follow the
documentation relevant to your Linux distribution to shut down any firewalls.
IRQ SMP Affinity
D-Link network devices use round-robin interrupt allocation method. The system administrator should make
sure that at least 4 cores are allocated in order to service D-Link NIC interrupts.
# echo <hex_bit_mask> > /proc/irq/40/smp_affinity
Note: Administrator will need to define the bit mask.
The following link provides more information regarding IRQ SMP affinity:
https://access.redhat.com/site/solutions/15482#4_Determine_the_correct_IRQ_SMP_affinity_mask
12

Advertisement

Table of Contents
loading

Table of Contents