Installation; Unpacking; Installing The Adapter - D-Link DFE-550TX User Manual

Installation of the DFE-550TX 10/100 NWay Ethernet Adapter
requires installing the hardware first. Once the interface card has
been installed into the host computer, the software can be installed.

Unpacking

CAUTION:
Open the shipping carton and carefully remove all items. In
addition to this User's Guide, ascertain that you have:
•
One DFE-550TX Ethernet Adapter Card.
•
DFE-550TX Software CD-ROM.
•
WOL Cable.
•
Multi Language Installation Guide

Installing the Adapter

1.
Shut down the computer, unplug its power cord, and remove
the cover.
2.
If your order does not include the Boot ROM option, go ahead to
Step 3.
install the Boot ROM Chip by plugging the chip into the Boot
ROM Socket on the DFE-550TX card. The notched end of the
Boot ROM Chip must be aligned with the notched end of the
Boot ROM Socket. Opposite alignment will destroy the Boot
ROM Chip!
6
Under ordinary circumstances, a DFE-550TX interface
card will not be affected by static electricity. However, it
is good practice to eliminate static charges by touching
a sizable metal object before handling the adapter card.
If your order includes the Boot ROM option, then
D-Link DFE-550TX Adapter

Installation