Server Warnings And Cautions; Removing The Access Panel; Installing The Access Panel - HP ProLiant ML110 G7 Maintenance And Service Manual

•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
•
Place parts on a grounded surface before removing them from their containers.
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.
WARNING:
Do not disable the power cord grounding plug. The grounding plug is an important safety
•
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
•
times.
• Unplug the power cord from the power supply to disconnect power to the equipment.
Do not route the power cord where it can be walked on or pinched by items placed against it.
•
Pay particular attention to the plug, electrical outlet, and the point where the cord extends from
the server.
WARNING:
internal system components to cool before touching them.
CAUTION:
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.

Removing the access panel

WARNING:
internal system components to cool before touching them.
CAUTION:
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
Power off the server if performing a non-hot-plug installation or maintenance procedure
1.
the server" on page 23).
Unlock and open the front bezel.
2.
Remove the thumbscrew on the access panel.
3.
Slide the access panel back.
4.
Lift the access panel to remove it.
5.

Installing the access panel

To reduce the risk of electric shock or damage to the equipment:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Do not operate the server for long periods with the access panel open or removed.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
For proper cooling, do not operate the server without the access panel, baffles,
Removal and replacement procedures 24
("Power down