Show Sntp - D-Link DXS-1210-12TC Reference Manual

Switch# show clock
Current Time Source
Current Time
Time Zone
Daylight Saving Time : Recurring
Offset in Minutes
Recurring From
Switch#
45-5

show sntp

This command is used to display information about the SNTP server.
show sntp
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display information about the SNTP server.
Example
This example shows how to display SNTP information.
Switch# show sntp
SNTP Status
SNTP Pool Interval
SNTP Server Status:
SNTP Server
---------------------------------------------- ------- ------- ---------------
10.0.0.11
10.0.0.12
10::2
FE80::1111vlan1
---------------------------------------------- ------- ------- ---------------
Total Entries:4
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
: SNTP
: 18:20:04, 2014-07-04
: UTC +02:30
: 30
: Apr 2nd Tue 15:00
To : Oct 2nd Wed 15:30
:Enabled
: 720 seconds
Stratum Version Last Receive
8
7 4
------- ------- ---------------
------- ------- ---------------
349
4 00:02:02
00:01:02 Synced