Show Snmp User - D-Link DXS-1210-12TC Reference Manual

Switch# show snmp engineID
Local SNMP engineID: 00000009020000000C025808
Switch#
38-11
This command is used to display information about the configured SNMP user.
show snmp user [USER-NAME]
Parameters
USER-NAME
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
When the username argument is not specified, all configured users will be displayed. The community
string created will not displayed by this command.
Example
This example shows how SNMP users are displayed.
Switch# show snmp user authuser
User name: authuser
Security Model: v2c
Group Name: VacmGroupName
IP access control list: HB5
User name: authuser
Security Model: v3 priv
Group Name: VacmGroupName
Authentication Protocol: MD5
Privacy Protocol: DES
Engine ID: 00000009020000000C025808
IP access control list:
Total Entries: 2
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide

show snmp user

(Optional) Specifies the name of a specific user to display SNMP
information.
298