Power On And Shut Down - NETGEAR ReadyNAS 102 Hardware Manual

Table 3. ReadyNAS 202 indicator descriptions
Indicator
Power button and LED
Disk LEDs (1, 2)
Disk activity LED
Rear panel Ethernet port
LEDs

Power On and Shut Down

This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
ReadyNAS OS 6 Desktop Storage Systems
Description
Press this button to turn on the ReadyNAS. The LED has these states:
• On. Powered on.
• Blinking. Booting or shutting down.
• Off. Powered off.
Each drive bay has an LED associated with it on the front panel of the storage
system. The disk LEDs have these states:
• On. Power is on and the disk is operating normally.
• Blinking. The disk was removed, failed, or is resynchronizing. See the display
screen for details.
• Off. The drive bay is empty.
The disk activity LED has these states:
• Blinking. A disk is active.
• Off. Disk is idling.
Two LED status indicators are built into each port, one off or green and one showing
three states: off, amber, or green. They indicate port speed and activity as follows:
• Green, green. 1000 Mbps connection speed, no activity.
• Green blinking, green. 1000 Mbps connection speed, activity.
• Green, amber. 100 Mbps connection speed, no activity.
• Green blinking, amber. 100 Mbps connection speed, activity.
• Green on, off. 10 Mbps connection speed, no activity.
• Green blinking, off. 10 Mbps connection speed, activity.
• Off, off. No connection.
NETGEAR ReadyNAS 202
34