Power On And Shut Down - NETGEAR ReadyNAS 102 Hardware Manual

Table 18. ReadyNAS 716X indicator descriptions (Continued)
Indicator
Rear panel Ethernet port
LEDs (10 Gb)
Status display screen

Power On and Shut Down

This section describes how to power on and shut down your system. If you must shut down the system, use
one of the preferred shutdown methods whenever possible.
Power On
When you connect the system to a power supply and the Power switch is in the On position or the system
recovers from a power outage and the Power switch is in the On position, the following occurs:
• The system automatically powers on if you enabled the Wake on LAN (WoL) feature or scheduled the
system to automatically power on or off.
• The system returns to its last state if the Wake on LAN (WoL) feature is disabled and you did not schedule
the system to automatically power on or off:
ReadyNAS OS 6 Desktop Storage Systems
Description
Two LED status indicators are built into this port. They indicate port speed and activity
as follows:
• LED 1
Off. No link.
Solid green. Linked.
Blinking green. Activity.
• LED 2
Solid green. 10 GbE.
Solid yellow. 1 GbE.
Off. 100 Mbps.
Displays messages about the status of your storage system. Note that the status
display screen goes to sleep to prevent burn-in. To wake the status display screen,
activate the proximity sensor, press the touch pad, press the OK button, or press
the Power button once. If the storage system reports an abnormal operation or error,
the status display screen stays on.
NETGEAR ReadyNAS 716X
153