Status Information - NETGEAR ReadyNAS 102 Hardware Manual

Figure 6. ReadyNAS 104 rear panel
1. eSATA port
2. Reset button
3. USB 3.0 ports
4. GbE ports with LED status indicators
Note The two GbE ports are equivalent. They can be used as two separate Ethernet
connections, or can be configured as a single, bonded port with a 2 Gbps potential
speed. For information about how to configure a bonded port, and the network
configuration requirements needed to support 2 Gbps, see the ReadyNAS OS 6
Software Manual, which is available at netgear.com/support/product/ReadyNAS_OS_6.
5. Power cable socket
6. Exhaust fan
7. Kensington lock

Status Information

You can obtain information about the status of your storage system by reviewing the indicators listed in the
following table.
ReadyNAS OS 6 Desktop Storage Systems
NETGEAR ReadyNAS 104
26