Casio DT-930 Hardware Manual page 43

For Downloading
HOST PC
RS-232C
115.2 Kbps (max)
DIP Switch Setting
Table 7.11
No. Use of Switch
1 Baud rate
switching 0
2 Baud rate
switching 1
3 Mode switching
0
4 Mode switching
1
5 Termination
switching
6 Baud rate
switching 0
7 Baud rate
switching 1
8 Baud rate
switching 2
9 Flow control 0
10 Flow control 1
Notes:
1. This baud rate must be reduced if the line quality is poor.
2. Make the appropriate DIP switch settings for the connected PC.
3. This setting is invalid during the passive operation.
4. Set to ON if only one Cradle is used.
DT-930
Satellite Cradle
RS-422
Modular cable
Through operation
IR comm.
115.2 Kbps (max)
Fig. 7.5
Destination
DT-930 and To GA/to CPU
Cradle PB6
DT-930 and To GA/to CPU
Cradle PB7
To GA/to CPU
PA13
To GA/to CPU
PA14
To GA/to CPU
PA15
Cradle and To CPU PB0
P/C
Cradle and To CPU PB1
P/C
Cradle and To CPU PB2
P/C
To CPU PB3
To CPU PB5
43
DT-930
Satellite Cradle
RS-422
Modular cable
Passive operation
IR comm.
115.2 Kbps (max)
Setting
Switch
Through
middle
IRSPEED ON ON
0
IRSPEED OFF OFF
1
MODE0 OFF ON
MODE1 ON OFF
ENDSW OFF OFF
Note 4
PCSPEED Note 3 Do not care.
0
PCSPEED Note 2
1
PCSPEED
2
FLOWSE
L0
FLOWSE
L1
DT-930
Satellite Cradle
Passive operation
IR comm.
115.2 Kbps (max)
Passive
Remark
In
At end
ON 115.2Kbps
OFF
Note 1
ON
OFF
ON