Chapter 4. General Specifications; Hardware - Casio DT-930 Hardware Manual

4. General Specifications
4.1.

Hardware

Table 4.1 DT-930 hardware specifications
Block
CPU and memory
CPU
RAM
F-ROM
Clock
Calendar
Buzzer
Display
Input
Laser scanner
Continue.
Item
SH1 (32-bit RISC type)
Clock frequency 4.92/2.46/1.23 MHz
4 Mbytes
16 Mbytes
Clock
Built-in chip
Sound Step/Setup
volumes
Max. volume
LCD panel Type
No. of dots
Dot pitch
Displayed character types
No. of 6-dot 6x6 dots
characters
6x12 dots
12x12 dots
8-dot 8x8 dots
8x16 dots
16x16 dots
10-dot 10x10 dots
10x20 dots
20x20 dots
Icons
Contrast adjustment
Backlight
Power key, Type
Numeric keys,
Location
Function keys, L, R
keys
INIT key Type
Location
Trigger key Type
Location
Method
Wave length
Laser output
Number of scans
Resolution
PCS
Readable depth Straight
Angle
Readable width Straight
Angle
Straight
Angle
Specification
Year/month/day/hour/minute/
second/day of the week/leap year
CB-09FP
4 steps (Loud/Middle/Low/OFF)/
Software setup
75 dB or more
STN with phase compensation
film
128 x 64 dots
0.33 x 0.38 mm
ANK/JIS Level I, II Kanji/Extra
/User-defined characters
210 characters
105 characters
50 characters
128 characters
64 characters
32 characters
72 characters
36 characters
18 characters
Shift/Low main battery voltage/
Low sub-battery voltage
16-step electronic control
LED
Rubber-sealed contact type
Front
Push-in type
On the rear side
Rubber-sealed contact type
Right and Left sides
Semi-conductor laser
650±10 nm
<1 mW
100±20 scans per second
0.127 mm or more
0.45 or more
0 to 450 mm
0 to 400 mm
65 mm max. (at depth of 0 mm)
60 mm max. (at depth of 0 mm)
390 mm max. (at depth of 450
mm)
360 mm max. (at depth of 400
mm)
10
Remark
with auto self-start
function
21 digits x 10 lines
21 digits x 5 lines
10 digits x 5 lines
16 digits x 8 lines
16 digits x 4 lines
8 digits x 4 lines
12 digits x 6 lines
12 digits x 3 lines
6 digits x 3 lines