Removing The Side Cover - Canon CXDI-50G Service Manual

Removing the side cover

1.2
Side cover (R_ASM)
Side cover (C_ASM)
Shock sensor (pigment)
Screw (x2)*
1. Loosen the screw (x2x2) fix the side cover (L_ASM) and (R_ASM). And remove the cover
carefully because the cover is pushed into the ditch so as not to come out.
2. Lift the side cover (C_ASM) with a little and remove it.
3. Applied the solvent, loosen the screw (x2) and remove the plate.
Exchange the shock sensor when its color is red.
Note:
1. Handle with carefully so that the defect should not adhere.
4. Repair Guide
2
Sleeve cover
Side cover (L_ASM)
Screw (x2x2)
Shock sensor
(Color former)
Plate