Table of Contents
Advertisement
Configuring the USM 35X for a test application
5.14 Configuring the USM 35X for
a test application
Besides the default settings for the instrument opera-
tion, you have to configure the USM 35X for calibration
and test tasks. You will find the corresponding functions
in the function groups MEAS, MSEL and LCD.
In addition, you have to check the current time and
date, and set them if required, so that they are correctly
stored together with the test results. Please look up the
function groups CFG1 and CFG2 for more functions for
the general instrument setup (please refer to chapter
5.15 General configuration ).
Krautkramer USM 35X
– If required, go to the third operating level.
– Select the function group MEAS.
Issue 01, 04/2005
Operation
5-43
Advertisement
Table of Contents
