Honeywell HDZ302D User Manual page 70

70 | equIP® Series 30x Zoom WDR PTZ Camera User Guide
To enable motion detection:
1.
2.
3.
4.
5.
www.honeywell.com/security
Select the Enable check box.
Next to Alarm Period, click Setup. The Alarm Period window opens.
Set the days and times when you want the alarm function to be active, and then click Save.
In the Anti-Dither field, enter the anti-dither time in seconds. Enter a value between 0 and
100 seconds. The system will only allow one motion detection event within this period.
Set up motion detection areas:
a. Next to Area, click Setup. The Area window opens.
b. By default, the whole video window is configured as a motion detection area. To
define a smaller area, drag your mouse over the area(s) that you want to deselect, or
click Remove All, and then redraw the area(s) with your mouse.
c. You can define up to 4 motion detection profiles (regions), each with different
sensitivity and threshold settings. Next to Region, click one of the solid color tiles to
select a region. Drag the Sensitivity and Threshold sliders to the desired values.
Sensitivity measures the amount of change in a scene that qualifies as motion.
Threshold measures the amount of motion in a scene required to trigger a motion
detection event.
d. Click Save to apply the settings.