Maintenance Instructions; Software Updates; Cleaning; Accessories - RIDGID SeeSnake CS1000 Operator's Manual

Figure 64 – Report Preview in SeeSnake HQ
For a complete description of SeeSnake HQ and how to use
it go to www�hq�seesnake�com� To contact the SeeSnake HQ
support team send an email to hqsupport@seesnake�com�
Download the latest version of SeeSnake HQ for free from
www�hq�seesnake�com�

Maintenance Instructions

Software Updates

If Auto-Launcher is enabled on the SeeSnake HQ and if
software updates for the CS1000 are available, an update
notification will automatically appear on the computer� If
Auto-Launcher is not enabled, manually check for software
updates from the Home Window by either selecting "Check
for Update" from the Help menu or by selecting "Device
Manager" from the Tools menu� After performing a manual
check, a notification will appear if updates are available�
To install a software update on the CS1000, click the "Yes"
button from the notification pop-up window and select the
CS1000 from the device manager� Insert a USB drive into
the computer and select the "Copy" button from the pop-up
window to download the software update� After download-
ing the software update, remove the USB drive from the
computer and insert the USB drive into the CS1000� Select
"Update" from the window that pops up on the C1000� After
the CS1000 copies, extracts, and verifies the update, click
the power button to reboot the CS1000 when prompted to
complete the installation�

Cleaning

WARNING
Disconnect all cords and cables and remove batteries
prior to cleaning the CS1000 to reduce the risk of electri-
cal shock.
Do not use liquid or abrasive cleaners on the CS1000�
Clean the CS1000 with damp cloth� Only clean screen with
cleaners approved for use on LCD screens� Do not allow
any liquid to enter the CS1000�
28 – English
TM

Accessories

The following accessories have been designed for use
with the CS1000. Other accessories may become hazard-
ous when used with the CS1000. To reduce the risk of seri-
ous injury, only use accessories specifically designed and
recommended for use with the CS1000.

Transport and Storage

Keep the equipment indoors or well-covered in wet weather�
Store the machine in a locked area, out of the reach of chil-
dren and people unfamiliar with its operation� This machine
could cause serious injury in the hands of untrained users�
Do not expose to heavy shocks or impacts during transport�
Remove batteries before shipping and before storing for
extended periods�
Store electrical devices in a dry place to reduce risk of
electrical shock� Store in temperatures from 14°F to 158°F
[−10°C to 70°C]� Store the unit away from heat sources
such as radiators, heat registers, stoves, and other products
(including amplifiers) that produce heat�

Service and Repair

Improper service or repair can make the CS1000 unsafe to
operate.
Service and repair of the SeeSnake CS1000 must be per-
formed by a RIDGID Independent Authorized Service
Center�
For information on your nearest RIDGID Independent Ser-
vice Center or any service or repair questions:
WARNING
• RIDGID-SeekTech or NaviTrack Locator
• RIDGID-SeekTech or NaviTrack Transmitters
• CountPlus Cable Counter cable-measurement system,
normally built in to SeeSnake Pipe Inspection Systems
WARNING
• Contact your local RIDGID distributor�
• Visit www�RIDGID�com or www�RIDGID�eu to find your
local Ridge Tool contact point�
• Contact Ridge Tool Technical Service Department at
rtctechservices@emerson�com or, in the U�S�A� and
Canada, call 800-519-3456�